Floor-supported garage shelving is another site-built option. One method for constructing these is to form upright supports by running vertical 2x4 boards every 50 inches. Each 2x4 should rest on the floor and be attached to a rafter or ceiling joist at the top. Then, additional 2x4 boards are attached horizontally on edge between the uprights and particle board is used to create the shelf. Dimensions are usually 19-25 inches deep with 25 inches between each shelf. These are only suggested dimensions and can be adjusted to better accommodate the size of the items that will be stored.
Not all shelving is meant to be designed as corner shelving. It would be impractical for a book case to be made in the corner shelving design, because there would be valuable shelf space that could not be used to store books because of the angle of the back side of the shelves. A china cabinet or hutch would pose the same design problem.
If you are trying to optimize the space in your home then corner shelving is a great option. They come in all different designs and colors so it's pretty easy to find what your looking for. Corner shelves also vary in price, so you'll have to know your budget before you begin to shop. It's also a good idea to measure the amount of space you have available so you know the basic size you're looking for. This type of shelving works great in any room in your home and even in a garage to store tools. Any type of room where you have limited floor space can benefit from the aesthetics and designs of corner shelves.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does www.ids-usa.us claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.